T Piece, Press Fittings, reduced F/F/F | 54_28_54

T Piece, Press Fittings, reduced F/F/F
54_28_54

Code: PTR_5428FFF
Weight: 0,35 kg

Variant

Quantity

315,00 Kč

Prices are stated without VAT

Purchase in €

IN STOCK

Ask a technician

Basic information

Stainless Steel DIN 1.4301 (AISI304)
material wall thickness 1,5 mm
Type of O-ring FKM

Fields of application

distribution of drinking, service, and rainwater
wastewater installations
heating distribution
cooling water, glycol cooling circuits
steam and condensate return pipes
water distribution systems for extinguishing
fittings cannot be used on gas (natural / PB)

O-ring FKM Material Characteristic

FKM (FPM, Viton®, Fluorel®) is often used for its resistance to extreme temperatures and aggressive chemicals. The strong carbon-fluorine bonds that make up the polymer structure have high thermochemical resistance and other excellent properties, such as low compression set at elevated temperatures.

FKM offers excellent resistance to mineral oils and fats, aliphatic, aromatic and some chlorinated hydrocarbons, fuels, silicone oils, and fats. However, FKM exhibits poor resistance to ethers, ketones, esters, and amines.

(Source: http://www.eriks.cz/eriks.asp?title=Viton-FKM-O-krou%9Eky&pageid=3702)

Temperature Range: -20 to +200°C , temporarily +300°C

has significantly lower mechanical properties in hot water and steam (medium mechanical strength, low gas permeability)

FKM O-ring is resistant to	temperatures, ozone, weather, aging, acids, mineral, animal and silicone oils and fats, synthetic hydraulic fluids, HFD pressurized fluids, fuels, aromatic hydrocarbons (benzol, toluene), high vacuum, organic solvents, and other chemicals
Not resistant to	polar solvents (acetone, etc.), glycol-based brake fluids, superheated steam, ammonia gas, amine alkali, low molecular weight organic acids (formic, acetic)

Tested and certified in the testing laboratory (you can see the Certificate Attached in categories of goods below)