Pneumatically-operated Valves, Angle Seat - 45°, G-thread

We supply pneumatic actuators without plastic connection fittings - section Pneumatic components

A pilot valve must be purchased to operate the seat valve. A suitable type can be found in the category  Pilot Solenoid Valves 3/2

Technical parameters of pneumatically operated valves, angle seat 45°:

• valve type: single acting, a normally closed NC
• connection: see individual valves
• hole size: see individual valves
• medium pressure: 0 ~ 1.6 Mpa (up to 16 bar)
• control air pressure: 0.6 ~ 10.8 Mpa (6-8 bar)
• valve body material: see individual valves: SS - stainless steel CF8M (corresponds to AISI316) or CF8 (corresponds to AISI304)
• drive material: polyamide
• seat seal: PTFE, PPL
• coil seal: PTFE, PPL
• piston seal: FKM (fluoroelastomer)
• medium temperature: range according to the used seal -10 ~ + 200 ° C
• ambient temperature: –10 ~ + 80 ° C
• viscosity: max. 600 mm2 / s
• designed for water, liquids, water vapor

Principle of operation single acting valve:

This type of valve is widely used in operations requiring repeated start-up in a short time interval, the advantage is its fast and accurate response. The valve is opened with compressed air.

Areas of application:

Applications in the dairy, brewing, food, beverage and chemical industries. Filling equipment for beer and other beverages. Textile printing and dyeing. Foaming equipment. For wastewater treatment applications. Suitable for machine tools for refrigerant control. For laundries and dry cleaners (dosing of detergent, water).