Manomètre avec membrane de séparation, raccord alimentaire DIN 11851, cadran 100 mm| écrou DN32
Les appareils de cette catégorie doivent être assemblés et remplis à partir de composants disponibles sur la boutique en ligne. C'est une opération chronophage, si vous commandez un grand nombre de pièces, nous ne pouvons garantir une expédition immédiate. Veuillez nous contacter par téléphone au 739 518 466.
The use of these manometers is usual for the following cases:
- highly viscous liquids
- liquids with solid particles, sedimenting sludge
- hot liquids that solidify or crystallize as the temperature drops
- aggressive liquids
- in cases where there are strict requirements for perfect cleaning and sanitation of the system
This type of pressure gauge (manometer) is used to measure the pressure of liquids and gases in cases where it is inadmissible for the measured medium to enter the measuring device of the pressure gauge.
The given concept consists of the use of a separating membrane and an inert liquid that transfers pressure to the measuring device of the pressure gauge (manometer).
Prix à partir de
2 305,00 Kč
Les prix sont indiqués hors TVA
Informations de base
Les appareils de cette catégorie doivent être assemblés et remplis à partir de composants disponibles sur la boutique en ligne. C'est une opération chronophage, si vous commandez un grand nombre de pièces, nous ne pouvons garantir une expédition immédiate. Veuillez nous contacter par téléphone au 739 518 466.
Caractéristiques techniques du séparateur à membrane avec écrou coulissant
| Matériau de la membrane de séparation | AISI 316L (1.4404), Ra≤0,8 µm |
| Matériau du corps du séparateur | AISI 316 (1.4401) |
| Matériau de l'écrou de couverture | AISI 304 (1.4301) |
| Température de fonctionnement | –45 °C à +150 °C |
| Diaphragme conçu pour la plage de pression | 0-60 bar |
| Filling according to application requirements | silicone oil, vegetable oil (almond) |
| Pressure gauge connection to separator | internal thread 1/2" BSP |
| Separator connection | food grade fitting - union nut DN32 according to DIN 11851 |
Technical data of all-stainless steel manometers, 100 mm (4") dial
- The pressure gauge is made of stainless steel, casing material AISI 304, and thread material AISI 316. The sensing device is a Bourdon stainless steel spring.
- The connector is welded by the TIG method.
- As standard, it is supplied with a glycerine filling (protection against operational shocks).
- Measuring range: 0–2.5 bar/0–6 bar/0–10 bar.
- Operating temperature: –20 °C to +200 °C
- Ambient temperature: -40 °C to 60 °C
- Glass sight glass.
- Bottom connection, G1/2" BSP thread.
- The size of dials DN 100 mm.
- They meet the requirements of EN 837–1, accuracy class CL 1.0.
- They are designed with an emphasis on long-term durability and extreme operating conditions.
- They are also intended for operation where vibrations or pulsating pressures occur.
The use of these manometers is usual for the following cases
- highly viscous liquids
- liquids with solid particles, sedimenting sludge
- hot liquids that solidify or crystallize as the temperature drops
- aggressive liquids
- in cases where there are strict requirements for perfect cleaning and sanitation of the system
This type of pressure gauge (manometer) is used to measure the pressure of liquids and gases in cases where it is inadmissible for the measured medium to enter the measuring device of the pressure gauge.
The given concept consists of the use of a separating membrane and an inert liquid that transfers pressure to the measuring device of the pressure gauge (manometer).
