Basic information
| Material (screws, float, joints) | ABS, transparent part ASA |
| Connection | glued joint, inner diameter of the connecting pipe 32 mm |
| O-ring seal | Viton |
| Temperature | 0 °C to 60 °C |
| Max. pressure | 0.6 MPa |
| Medium | liquid (water, weak base, weak acid) |
| Connection | thread |
| Flow rate | 0.25 to 2,5 m³ / h (250-2500 l/h) |
| Measuring accuraccy | ±4% |
| Dimensions | see the attachement |
Areas of application for the rotameter (flow meter)
It is used in the chemical industry, light industry, pharmacy, food industry, applications in environmental protection, etc.
Mounting position of flow meters from our offer: vertical (vertical). The flow meters are only functional in the vertical position.
Chemical resistance ABS / ASA
ABS polymers are resistant to aqueous acids, alkalis, concentrated hydrochloric and phosphoric acid, alcohols, animal, vegetable and mineral oils. Swells in glacial acetic acid, carbon tetrachloride and aromatic hydrocarbons. Degradují v koncentrované kyselině sírové a dusičné. Jsou rozpustné v esterech, ketonech, ethylendichloridu a acetonu.
Acrylonitrile-styrene-acrylate terpolymer ASA excels in
- increased weather resistance compared to ABS;
- improved resistance to the effects of ultraviolet radiation. This can be further improved by coloring the products in dark shades;
- improved low temperature toughness compared to butadiene rubber modified plastics.
ASA cannot be used in environments with concentrated acids, aromatic and chlorinated hydrocarbons, esters, ethers and ketones.
More from the category
Rotameter (flowmeter) Plastic - Glued Joint
Rotameter (flowmeter) Plastic - Glued Joint 0.25…
Material (screws, float, joints): ABS, transparent part ASA Connection: glued joint,…
Rotameter (flowmeter) Plastic - Glued Joint 0.01…
Material (screws, float, joints): ABS, transparent part ASA Connection: glued joint,…
Rotameter (flowmeter) Plastic - Glued Joint 0.6~6…
Material (screws, float, joints): ABS, transparent part ASA Connection: glued joint,…
