Sanitary stainless steel check valve, welded type S-S DN50

check valve, welded type DN50, stainless steel

check valve stainless steel, welded, DN50

check valve welded, stainless steel DN50

Sanitary stainless steel check valve, welded type S-S
DN50

Code: CHVW_50
Weight: 1,10 kg

Sanitary stainless steel check valve, welded type S-S | DN50

Variant

Quantity

960,00 Kč

Prices are stated without VAT

Purchase in €

IN STOCK

Ask a technician

Basic information

Standard	welded DIN11850-series1, DN50
Type 2	2- piece, connected with CLAMP, silikone gasket
Maximal working pressure	10 bar
Material	stainless steel 1.4301 (AISI 304)
Maximal working temperatures	–10 °C/150 °C (according to material of gesket)
Disk gasket	silicone
Inner surface	Ra≤0.8 µm
Outer surface	Ra≤1.6 µm
Designed for	liquid, water, oil

Montage

The mounting direction is the same as the medium flow direction. Pressing the medium on the disc opens the flap (see the blue arrow in the flap dimension drawing).

The damper is installed in front of the pump to ensure proper operation of both the pump and the damper.

Check valves are welded to a suitable counterpart. In the case of welding, the valve must first be disassembled to prevent damage to the seal. We recommend checking the tightening of the bolts (CLAMP sleeve) in operation.

Prior to installation, the pipe system must be flushed to prevent damage to the valve by mechanical impurities.

Before maintaining or dismantling the valve, make sure that the temperature and pressure of the medium flowing through the pipe have already dropped (medium temperature above 50 ° C and below 0 ° C can cause serious injuries). Hazardous fluids must be drained before maintenance.